Lab simulation 2 1 install zenmap and scan the network

LAB SIMULATION 2 1 INSTALL ZENMAP AND SCAN THE NETWORK HOW TO
LAB SIMULATION 2 1 INSTALL ZENMAP AND SCAN THE NETWORK SOFTWARE

Open the IP scanning software you just downloaded.

Please write it down! In our test, the вЂњDefault GatewayвЂќ (thatвЂ™s the IP of the router) is вЂњ192.168.1.1вЂќ, so in the following tutorial, we will take вЂњ192.168.1.1вЂќ as an example. This will give you the network information youвЂ™ll need later.

Find Out Your Home Internet Setting: While your computer is connected to the Internet, go to the Command Prompt and type вЂњipconfigвЂќ then press вЂњENTERвЂќ Key.

Some miners may need longer time (1~7 minutes) to connect itself to your network).

Power on the miner, and wait for about 1~3 minutes (the miner needs time to connect itself to the router.

In win7 ~ win10, disable the Windows Defender).

Disable the firewall and antivirus on your computer (for example, the Kaspersky.

Connect the miner to the router via the ethernet cord.

Google Chrome) and try out every IP address in the вЂњDevices ManagementвЂќ of your router. However, if the MAC address is not labeled, you can open your internet explorer(eg. Then the IP address with the MAC address as labeled on the miner is the IP address ofВ your miner. If the MAC address is labeled on your miner, then you could find out the IP address of your miner via the MAC address on the devices management of your router. There may be a MAC address attached on the miner for some model. You can either find the IP via the MAC address of your miner. All devices connected to this router will be shown here.В The following picture is a screenshot of the Devices Management in the admin dashboard of a TP-LINK router.

Fourth, Navigate to the вЂњ Devices ManagementвЂќ of your router.

You may need to input your router admin username and password.

Third, log in your router admin dashboard.Second, connect your miner to the LAN port of your router and power on the miner.You can find that information in your router guide.

LAB SIMULATION 2 1 INSTALL ZENMAP AND SCAN THE NETWORK HOW TO

First, you need to know how to log in your router admin dashboard.Well, the first and the best way to get the IP of your miner is to log in the admin dashboard of your router and check the IP there. We will introduce them one by one in this tutorial.В We will take bitcoin miner as an example which applies equally to other cryptocurrency miners, such as litecoin miners, dash miners etc.ДЇind the IP in your Router Admin Dashboard Find the IP address in your Router Admin Dashboard.This is a guide for how to find out the IP address of the miner.В There are several ways to get the IP address of your miner:

Lab simulation 2 1 install zenmap and scan the network